Ken Block’s Hoonicorn Mustang Price & Specs

Ford fans around the world enjoy the fun and practicality of late-model pony cars, but nothing compares to Ken Block’s Hoonicorn Mustang specs. In fact, every Ford Mustang for sale would love to be a Hoonicorn. Drifting is the world’s most popular motorsport, and it has allowed Ken Block to become a hero to young […] The post Ken Block’s Hoonicorn Mustang Price & Specs appeared first on duPont REGISTRY Daily.

Ken Block’s Hoonicorn Mustang Price & Specs
Hoonicorn Mustang 5

Ford fans around the world enjoy the fun and practicality of late-model pony cars, but nothing compares to Ken Block’s Hoonicorn Mustang specs. In fact, every Ford Mustang for sale would love to be a Hoonicorn. Drifting is the world’s most popular motorsport, and it has allowed Ken Block to become a hero to young and old alike. As such, we invite you to join us as we break down every aspect of the Hoonicorn Mustang.

Hoonicorn Mustang leaves with all wheels spinning

The Hoonicorn Mustang project began in 2013 as a way to extol the virtues of Ford Performance and racing suppliers. The need for big Hoonicorn horsepower necessitated a potent V8. That is where Catcus Jack offered the expertise of his engine builders. Roush-Yates built a bulletproof 410 stroker. The car debuted as the 1965 Hoonicorn RTR, sending 845 horsepower to all wheels.

Not even a Trophy Truck can beat the Hoonicorn Mustang

In order to spin all tires, all the time, the engine specs start with a Ford 5.8-liter small-block V8. The architecture dates back to the Windsor block, but Roush-Yates improved the internals for strength and lower friction. It is loaded with forged internals and a solid-roller camshaft. Perhaps one of the most guarded secrets are the valve events of this unique Roush Yates Turbocharged 410 cubic-inch Ford V8.

Hoonicorn Mustang invaded downtown Los Angeles for a shakedown

This 1965 Ford Mustang was built from the ground up to be All Wheel Drive. That is why Ken chose Vaughn Gittin’s team to work their magic. Starting in the virtual realm, the RTR team realized strength and safety are paramount. Therefore they chose carbon fiber body panels over a tube frame chassis. ASD Motorsports was brought onboard to build an inboard suspension. Control arms were CNC machined from billet stock. This allows the Hoonicorn Mustang weight to be lower than any late-model Ford for sale. The ultimate aspect is less un-sprung weight than many dedicated race cars.

You might assume that the driveline is filled with electronics. While fancy torque vectoring systems work well to keep novice drivers safe in bad weather, the mark of a true rally master is a lack in complexity. That is why symmetry is the foremost aspect of the Hoonicorn Mustang chassis. The front and rear track width is identical. This allows incredible steering feedback and the same geometry for the control arms. The wheels, tires, differentials and brakes are nearly identical on all corners. Ken Block is able to send torque front to rear by using the independent brake located next to the shifter.

Hoonicorn Mustang took on downtown london for a Top Gear test

After destroying 20 sets of tires in Los Angeles, Hoonigan Racing decided to attack the world’s most famous hill climb. Instead of racing at Sea Level, the Hoonicorn Mustang would be starting at 4,700 feet and racing into the sky. Therefore Garrett Turbochargers offered to acclimate the Hoonicorn engine to high altitudes. The velocity stacks were retired in favor of a 3D printed intake by Switzer Dynamics. This allows 21 lbs of boost to fill the cylinders with the help of a custom camshaft. Aspects like these prevent the likelihood of another Hoonicorn Mustang for sale.

Hoonicorn Mustang chained to an anchor for a tire test

1965 Ford Mustang Hoonicorn Specs:

Engine: 6.7-liter Roush-Yates V8
Horsepower: 1,400 hp
Torque: 1,250 lb-ft
0-60 mph: 1.8 seconds
Top Speed: 255 mph
Price: Priceless
Transmission: 6-speed Sadev SC90-24

Hoonicorn Mustang version 1.0 had velocity stacks through the hood

A series of other changes were made in order to meet the requirements of Pike’s Peak. What emerged is the Hoonicorn Mustang RTR V2. It made use of 1,400 horsepower and 1,250 lb-ft of torque to reach 14,000 feet in altitude. The run was documented in the Hoonigan documentary: Climbkhana. More recently, fans have discovered the car’s abilities in Forza Racing. Realizing that it was a favorite for heads up competition, Hoonigan and Ken Block chose to a quarter-mile drag race against a McLaren Senna.

The hoonicorn Mustang in its natural habitat

Although the Hoonicorn Mustang was not built with drag racing in mind, the suspension was easily dialed-in for a quarter-mile hole shot. The Sadev 6-speed sequential proved perfect for the task, as the AWD system spun all tires.

We know of no situation where the Hoonicorn Mustang would not prevail. As with their other builds, the Hoonicorn price can’t be calculated on parts and time alone. It will be the focus of intense bidding wars if Ken chooses to part ways.

Hoonicorn Mustang 6

If you like the smell of burning rubber, the Hoonicorn Mustang has a square setup for optimal grip. The forged wheels are unique Fifteen52 Forged Tarmac R43 in 18” x 10.5”. They are wrapped in 295/35/18 Toyo Proxes R888R tires. Since the axles are also equal length, the transmission offers equal opportunities to ignite them all.

Browse Ford Mustang For Sale
Many have tried to race the Hoonicorn Mustang only to fail

Image Source: Facebook/The Hoonigans

The post Ken Block’s Hoonicorn Mustang Price & Specs appeared first on duPont REGISTRY Daily.

Source : Autofluence More